- Manufacture / Vietnamese
- Italian design, Italian company
- Warranty / 2 years home maintenance
- Warranty through Ariston Company
- Voltage: 220V/240V - 50/60Hz
- Power: 7750W
- Pressure rate: 0.8MPa
- Installed with 6mm wire
- More than one distribution point
- Mini size
- It contains a dual-protection thermostat
- Easy to install
- AURES SM 7 SASO
- COD. 3520026
- HGR,M: 7750W 220-240V
- Weight: 2.024 KG
- Energy efficient (c)
- IP25
Any inquiries or warranty from Ariston
(Guarantee company, not us)
- Maintenance number: 920012456
- Multi-point can provide hot water to all hot water points (shower - sink - bidet - etc.)
- It is very safe to use as it has a double thermal cut-out, in addition to a high rating according to the global IP protection standard, where it is classified as an IP24 device.
- It is very small in size, as its dimensions do not exceed the dimensions of an A4 print sheet.
- Luxurious Italian design.
- This device is made with high quality in the Ariston Group factory in Vietnam.
- It achieves significant savings (up to 65%) in energy consumption due to the principle of heating on demand, as the heater only works when the hot water mixer is opened.
- Through the front thermostat knob, you can choose heating levels to further save electrical energy consumption.
- Heating levels
- off does not work
- Low works on 3000 watts
- Medium works on 4750 watts
- high works at full power 7750 watts
- It does not require high water pressure as its minimum operating pressure starts from half a bar. However, a water pressure ranging from one and a half to 3 bars is recommended for optimal performance.
- It has a capacity to withstand high water pressure up to 8 bar.
- Electricity is 220 volts at 31.8 amps at 220 volts, equivalent to 7750w 50/60 Hz.
- There is immediate maintenance at the customer’s home (two years warranty)
- You need mounting screws and heater coils.
- A 6 mm thick wire directly from the plate is necessary for efficient operation. Terms of warranty